Are you experiencing difficulty turning your kitchen faucet handle or noticing that the water pressure at your sink is not behaving as it should?
As effective and low cost maintenance methods go, lubricating the handle on a kitchen dome-style faucet can help get it back up to scratch.
Keep reading for the easy steps involved in making sure your Kitchen Faucet Handle is properly lubricated so you can enjoy perfect control when using the tap!
How Do You Fix a Stiff Kitchen Faucet Handle?
The main cause of a stiff kitchen faucet handle is water deposits that have built up over time.
These deposits can make the handle so tight and difficult to turn, it may appear as if it’s stuck in place. Fortunately, there are several ways you can fix this problem without having to replace the entire faucet.
First, try cleaning the handle with a mixture of vinegar and water. This will help loosen up any mineral deposits or soap scum that may be causing the handle to stick.
Rinse off the solution thoroughly with warm water once you’re done scrubbing and then dry off the faucet with a clean cloth or towel.
If cleaning doesn’t work, try lubricating the handle with a lubricant specifically designed for faucets. Most hardware stores carry such products and they can help to loosen up the handle.
If this doesn’t do the trick, take the handle off of the faucet and remove any buildup in it with a pair of needle-nose pliers or sandpaper. Once you’re done, reattach the handle and test it out to see if it works better.
If all else fails, you may need to replace the entire faucet assembly. In some cases, however, simply replacing one part – such as a washer or cartridge – can do the trick.
It’s best to consult an expert at your local hardware store on which option is best for your particular situation.
What Lubricant to Use on Kitchen Faucet?
When it comes to lubricating your kitchen faucet, you’ll want to use a lubricant specifically designed for plumbing or water-based applications. A silicone lubricant that is safe for food contact may be the best choice.
Silicone lubricants are often used on O-rings, seals, and other parts of the faucet that may become dry over time.
Make sure to avoid using petroleum-based products as they can damage rubber parts or plastic components and cause them to degrade faster than normal.
If a product states that it is non-toxic and doesn’t contain any petroleum ingredients, then it is safe for use with your kitchen faucet.
Be sure to read all product instructions carefully before using a lubricant and make sure to remove any sediment or debris from the faucet before lubricating.
To ensure that your kitchen faucet continues to remain in good working condition, it is important to regularly inspect the components of your faucet and apply lubricant as needed.
This will help reduce wear and tear and keep your faucet functioning properly. For more information on caring for your kitchen faucet, consult your manufacturer’s instructions.
If you have any questions about what type of lubricant to use on your kitchen faucet, contact a professional plumber for assistance.
How to Lubricate Kitchen Faucet Handle?
Lubricating your kitchen faucet handle may help to improve the quality of your water flow and make it easier to control. It can also reduce wear and tear on the parts, making them last longer.
To lubricate a kitchen faucet handle, you will need some plumber’s grease or silicone lubricant and an old toothbrush or cloth rag.
First, use a screwdriver to remove the screws that hold the handle in place. Take note of how many screws there are so that you can replace them correctly later. Once all of the screws are removed, carefully lift off the handle from its base.
Check for any corrosion or buildup on the metal parts beneath the handle. If necessary, use a wire brush or other cleaning tool to remove any deposits.
Once the parts are clean, add a small amount of lubricant to the threads of the faucet handle. Spread it evenly around the area using an old toothbrush or cloth rag.
Carefully place the handle back on its base and screw in all of the screws that were removed earlier.
Make sure they are tight enough so that they won’t come loose, but not too tight as this could cause damage to the threads and make it difficult to turn the handle in future.
Finally, run some cold water through your kitchen faucet for one minute and then check if there is any improvement in water flow or pressure.
Read: How to fix a kitchen faucet handle
Conclusion
If your kitchen faucet handle is stiff, there are a few things you can do to fix it. First, try lubricating the handle with WD-40 or another type of lubricant.
If that doesn’t work, you may need to replace the washer inside the handle. Follow these steps and you’ll have a smoothly operating kitchen faucet in no time!

Hey! I’m Anne. Welcome to Kitchen Faucet Advice! Anne have started this blog to help happy families to get right kitchen faucet for their lovely kitchens. When she is free, she loves writing about her experiences and play with her dog!