Do you have a kitchen faucet lever that recently stopped working? If so, then you may be curious about how to remove it. Not knowing how to safely remove a kitchen faucet lever is not just annoying but can lead to costly repairs if done incorrectly.
Don’t worry – we are here to provide you with the answers! In this blog post, we will outline the steps for removing your kitchen faucet handle, as well as provide some helpful tips and potential solutions along the way.
Keep reading and learn everything there is to know about removing a leaky kitchen faucet lever successfully!
Is It Difficult to Remove Kitchen Faucet Lever?
Removing a kitchen faucet lever is a relatively easy process, but it can be time consuming and requires some patience.
On some models, the handle may need to be removed with a screwdriver or pliers. If this is necessary, make sure you have the right tools for the job.
Once the handle is removed, you will need to remove any nuts that are securing the faucet body to the countertop. These nuts are usually located underneath the sink in an access panel.
Once they’ve been loosened and removed, you should be able to pull off the faucet from its mounting bracket. You may then need to remove any other parts that were connected to it such as hoses or valves.
How to Remove Kitchen Faucet Lever?
Removing a kitchen faucet with lever handles is a straightforward job that anyone can do. The main thing to remember is that the lever may be held in place by either screws or retaining clips.
If your faucet has screws, simply unscrew them using an appropriate sized screwdriver and carefully pull out the handle.
If it’s secured with retaining clips, you will need to gently pry them off with a flathead screwdriver and then slide the handle off.
Once the handle is removed, you should be able to see the valve stem and bonnet nut underneath.
Unscrew these components (using either pliers or an adjustable wrench) to disconnect the valve from its mounting bracket.
Finally, you can unscrew the faucet body from the sink. To do this, you will need to loosen the mounting nut from beneath the sink (using either a basin wrench or pliers). Then carefully lift out the faucet and set it aside for disposal or repair.
With these steps, you should now have successfully removed your kitchen faucet with lever handles!
Be sure to always wear safety glasses when working on any plumbing project and take all necessary precautions.
Read more: how do I remove a single lever faucet handle
How Do You Change a Faucet Lever?
To change a faucet lever, you will need the following tools: a flathead screwdriver, an adjustable wrench, plumber’s tape and new washers. Here is what you need to do:
1. Shut off the water supply at the valves beneath your sink.
2. Unscrew the handle from the top of your faucet with a flathead screwdriver and remove it from the stem.
3. Use an adjustable wrench to unscrew and take out the packing nut and washer set inside the valve body on your faucet.
4. Take off any additional parts on or around the stem such as seats, springs or bonnets before replacing them with new parts.
5. Wind plumber’s tape around the stem threads to create a waterproof seal and protect against leakage.
6. Gently screw the new handle onto the stem and tighten with an adjustable wrench. Make sure it is secure, but not overly tight so you can still turn the lever easily later on.
7. Replace all extra parts such as seats, springs or bonnets by gently tightening them in place with your adjustable wrench until they are snug but not too tight to prevent damage to the faucet parts over time.
8. Attach a new washer set inside the valve body back onto your faucet lever, securing with an adjustable wrench before re-tightening the packing nut.
9. Turn the water supply back on and test your newly replaced lever to ensure it is working properly.
By following these steps, you should be able to easily change a faucet lever in no time!
Conclusion
It is not very difficult to remove a kitchen faucet lever, but it is important to know how to do it properly. There are a few different ways that you can change a faucet lever, and each one has its own set of instructions.
Make sure that you follow all of the steps in the correct order so that you do not damage your sink or countertop.
With a little bit of patience and care, you should be able to remove your old faucet lever and install the new one without any problems.

Hey! I’m Anne. Welcome to Kitchen Faucet Advice! Anne have started this blog to help happy families to get right kitchen faucet for their lovely kitchens. When she is free, she loves writing about her experiences and play with her dog!