How to Replace Kitchen Faucet Handle

How to Replace Kitchen Faucet Handle?

Is your kitchen faucet handle old and rusty? Feeling like you need a change in the look of the kitchen sink?

Replacing the handles on your kitchen faucet is one of those simple tasks that can dramatically improve the appearance and functionality of any home’s kitchen.

Whether it’s an aesthetic overhaul or a repair, replacing a faucet handle is an easy fix requiring just a few tools and some basic knowledge.

In this blog post, we’ll walk through how to replace a kitchen faucet handle made of either standard single-handle pullout style/ball valve type fixture or a simple one in our step by step guide – so let’s get started!

Can You Replace Just the Handle on a Kitchen Faucet?

Yes, it is possible to replace just the handle on a kitchen faucet. However, it may not be necessary or recommended.

Depending on the age and condition of your faucet, it could be more cost effective to replace the entire fixture to ensure long-term functionality and durability.

If you decide to only replace the handle, you will need to make sure that you are purchasing a compatible handle for your existing faucet.

If unsure of which one will fit properly, bring along your old handle when shopping for a replacement at your local hardware store or plumbing supply outlet.

You should also pay attention to any screws or adapters needed in order for the new handle to fit securely on the existing base unit.

Read: Can’t get kitchen faucet handle off

How to Replace Kitchen Faucet Handle?

Replacing a kitchen faucet handle is a fairly easy task. The process involves disconnecting the old handle and replacing it with a new one. Here are some steps to help you get started:

1. Turn off the water supply valves underneath the sink, or wherever they may be located in your home before beginning any plumbing work.

2. Loosen the nuts that secure the handle to the valve stem with an adjustable wrench or pliers. You may also need to remove any decorative caps or buttons covering these screws first.

3. Lift off and set aside the old handle, then unscrew and remove all other components—like escutcheons and washers—connected to it from underneath the sink.

4. Inspect the valve stem for any corrosion or damage, and if necessary, replace it with a new one that matches the size of your new handle.

5. Place all components of the new handle in place on top of the valve stem, starting with the escutcheon plate followed by a rubber washer and finally the handle itself. Make sure everything is seated properly before securing them in place with nuts.

6. Turn back on the water supply valves and test that your kitchen faucet is working properly before you finish up!

7. If desired, you can add a decorative touch to your newly replaced faucet handle by adding a colored cap or button to match other hardware in your kitchen.

That’s it! With just a few simple steps, you can replace your kitchen faucet handle and upgrade the look of your sink area.

Conclusion

So, can you replace just the handle on a kitchen faucet? Depending on how old your faucet is and what model it is, you might be able to get away with replacing only the handle.

However, if your faucet is starting to show its age, or if it’s a cheaper model that isn’t built to last, then you might want to consider replacing the entire unit.

But don’t worry – even if you have to replace the whole faucet, it’s not as difficult as you might think.

With a few simple tools and a little bit of know-how, you can have your new faucet installed in no time.

Leave a Reply

Your email address will not be published. Required fields are marked *