Are you dealing with a problematic sink faucet? Has the touch-on sensor suddenly stopped working and now your faucet is stuck in one mode?
You’re not alone – this is a common issue with these types of fixtures. The good news is that it’s usually quite easy to troubleshoot and fix, even if you’re relatively inexperienced when it comes to DIY home repairs.
In this blog post, we’ll show you exactly what to do when your touch on sink faucet isn’t responding correctly – so keep reading!
How Do I Reset My Touch Kitchen Faucet?
If you have a touch kitchen faucet, resetting it is easy. Here are the steps:
1. Start by turning off the water supply connected to your faucet. You can usually find the shutoff valves on either side of the sink.
2. Remove any items that may be obstructing access to the faucet’s sensor, such as soap dispensers or accessories like filter systems or sprayers attached to it.
3. Find the cover securing the battery housing and remove it with a screwdriver. For most models, this will be located at the base of the spout near where it connects to the deck plate.
4. Once you have removed the cover, use a small screwdriver to carefully pry out the battery housing from its position. Then, remove the batteries and replace them with fresh AA or AAA batteries.
5. Replace the battery housing in its original location and secure it with the cover.
6. Turn on the water supply connected to your faucet and test your touch kitchen faucet by pressing its sensor several times to make sure that it is working properly again. If not, repeat these steps until you achieve success.
If you find that resetting the faucet doesn’t work, contact a professional plumber for more help. They can assess any other potential issues and provide more comprehensive repair services if needed.
How Do You Reset a Motion-sense Faucet?
To reset your motion-sense faucet, you will first need to locate the control module. This is usually located beneath the sink, typically towards the back of the cabinet.
Once you have located this module, turn off the water to your sink and disconnect the power supply going into it.
Make sure that no other electrical appliances or fixtures are connected to this same power source.
Once everything is disconnected, press and hold down the reset button on the control module for several seconds until all lights come on.
If there isn’t a button labeled “reset,” then look for one labeled “set up” or something similar – pressing and holding this should also work in resetting your motion-sense faucet.
After the reset button has been activated, you can reconnect the power supply and turn the water back on.
Test out your motion-sense faucet to make sure that it is now functioning properly. If not, repeat the steps again or contact a professional for help.
By following the above steps, you should be able to easily reset any motion-sense faucet in no time!
Read: What are problems with touch on sink faucets
Why My Touch on Sink Faucet Not Working?
If your touch on sink faucet is not working, there are a few possible causes. The most common cause of this issue is that the battery power has worn down or the connection between the control box and the tap has become loose.
Another potential issue could be with the actual touch sensor itself. If dirt or other debris has built up on it, it can prevent it from functioning properly.
To inspect if this is the case, you may need to unscrew the faceplate of your faucet and take a look at it for any signs of corrosion or damage.
If none of these issues appear to be present, you may need to replace some parts such as a broken solenoid valve or an electrical switch. If the issue lies within the wiring, you may need to contact a professional electrician to investigate further.
Once any potential issues have been identified and repaired, it’s important that you test your faucet to ensure that it is working properly again before using it in daily life.
With regular maintenance and proper usage, your touch on sink faucet should last for many years without any problems.
Conclusion
So, there you have it—a few quick and easy steps to reset your touch kitchen faucet. If you’re still having trouble or if your motion-sense faucet isn’t working properly, be sure to check the FAQs section on our website for more helpful tips.
And as always, if you need any additional assistance, feel free to comment your query in the comment section below.
Hey! I’m Anne. Welcome to Kitchen Faucet Advice! Anne have started this blog to help happy families to get right kitchen faucet for their lovely kitchens. When she is free, she loves writing about her experiences and play with her dog!