If you are dealing with a dripping kitchen faucet, don’t worry – you’re not alone! Dripping or leaking kitchen faucets can be an annoying problem for many homeowners.
While there may be a few different factors that could ultimately be causing your faucet to drip, they all generally have the same root cause: water pressure.
Understanding why and how it happens is key when it comes to figuring out how to stop the dreaded stream of water coming from your kitchen sink.
In this blog post we’ll break down the main reasons why kitchen faucets tend to drip and ways in which you can fix them yourself quickly and easily (without having to call the plumber!).
Why Does My Faucet Drip After I Turn It Off?
The most common cause of a faucet dripping after it has been turned off is due to worn-out washers and/or O-rings.
A washer or O-ring seals the valve seat in the faucet, preventing water from flowing when it’s not needed.
Over time, these parts wear out, leading to leaks when you turn off the faucet. In some cases, mineral deposits can build up on these parts over time as well, causing them to become brittle and crack.
If your faucet is leaking after it’s been turned off, the best way to fix it is to replace any worn-out washers and O-rings with new ones that are designed for your specific faucet.
You can usually find these parts at your local hardware store, and it’s usually a straightforward repair that only takes a few minutes to complete.
If you’re not comfortable tackling the repair yourself, you can always call a plumber for assistance.
In rare instances, your faucet might be dripping due to an issue with the main water supply line.
In this case, it’s best to contact a professional plumber as soon as possible so they can inspect and repair any potential damage.
No matter the cause of the drip, fixing it quickly is important in order to conserve water and avoid any further damage or costly repairs down the road. With some basic plumbing knowledge and patience, you should be able to repair a leaking faucet yourself in no time.
If you’re unsure of how to proceed, don’t hesitate to contact a professional plumber for assistance.
How Do I Stop My Kitchen Faucet From Dripping?
If your kitchen faucet is dripping, you may be able to repair it without calling a plumber. Depending on the type of faucet you have, there are different steps you can take to stop the dripping.
For ball-type faucets, check for worn parts and replace them if necessary. If the issue is not with worn parts, turn off the water supply valves beneath the sink and disassemble the faucet.
Replace any washers or O-rings that show signs of wear or damage, then reassemble and turn on the water supply valves.
If you have a cartridge-style faucet in your kitchen, start by examining all visible components for signs of leaks or cracks.
If any exist, replace the components with new ones. Then turn off the water supply valves and remove the handle to access the cartridge inside.
Replace it with a new one that is compatible with your faucet, then reassemble everything before turning on the water supply valves.
If you have a ceramic disc-style faucet, identify which parts are loose or worn and replace them as necessary. After replacing any parts that need to be replaced, put it all back together and turn on the water supply valves.
If none of these solutions work, contact a professional plumber to help diagnose and fix the issue. They can repair or replace any faulty parts so that your kitchen faucet will stop dripping and work properly.
By following these steps, you should be able to stop your kitchen faucet from dripping quickly and easily. If the issue persists, contact a plumber for assistance.
Read more: How to know if kitchen faucet is bad
What Is the Most Common Cause of a Dripping Faucet?
The most common cause of a dripping faucet is a damaged or worn out rubber washer. The washer is located inside the handle of the faucet and acts as an airtight seal when the handle is turned off.
Over time, these rubber washers can become dry, brittle, or cracked and no longer provide a tight seal, which causes water to leak out from around the handle.
Replacing the rubber washer is usually an easy repair that can be done with a few simple tools.
If you think your dripping faucet may be caused by something other than a worn out rubber washer then it’s best to call in a professional plumber for assistance.
In some cases, there may be deeper issues such as a broken pipe or malfunctioning valve that require more complex repairs.
No matter the cause of your dripping faucet, it’s important to get it fixed right away as this can lead to bigger headaches down the road and higher water bills in the meantime.
Conclusion
There are a few different reasons why your faucet might drip after you turn it off. The most common cause is an old or damaged washer.
You can try to replace the washer yourself, but if that doesn’t work, you should call a plumber.
If you have a ceramic disc faucet, then the problem might be with the O-ring seal. again, you can try to replace this yourself, but it’s probably best to call a professional if you’re not sure what you’re doing.
Thanks for reading and I hope this article helped solve your dripping faucet problem!

Hey! I’m Anne. Welcome to Kitchen Faucet Advice! Anne have started this blog to help happy families to get right kitchen faucet for their lovely kitchens. When she is free, she loves writing about her experiences and play with her dog!