Are you experiencing trouble with the touch on your kitchen faucet? Don’t worry, you’re not alone. Many homeowners struggle to keep their touch-sensitive faucets working properly.
In this blog post we will walk you through how to troubleshoot and fix a touch sensitive faucet that has stopped reacting or isn’t functioning as normal anymore.
Read on and learn all about the parts of a touch sensitive faucet, why it malfunctions, and what tools and steps are necessary for correcting any issue!
How to Fix Touch On Faucet in Kitchen Sink?
The touch feature in kitchen sinks is very convenient for those who need to multitask.
However, if your faucet does not react properly when you try to turn it on or off with a tap of your finger, there might be a few easy fixes you can try before calling a plumber.
• First, check the batteries in your faucet and make sure they are working properly. If they are low or dead, replace them with fresh ones.
• Check the power supply of the faucet and make sure it’s connected securely and that all wires are connected properly.
• Look at the sensor area around the handle of your faucet and make sure it’s clean. Dirt and grime can build up in this area, which can potentially block the signal being sent from your finger to the faucet. Cleaning the sensor with a damp cloth should do the trick.
• If none of these solutions work, it’s possible that you may have a faulty touch control module in your faucet. This requires a professional plumber to replace the module or repair any other underlying problems.
By following these simple steps, you should be able to get your kitchen sink touch feature working properly again in no time at all!
How Do You Bypass Touch Sensor on Faucet?
If you need to bypass the touch sensor on a faucet, you’ll need to access the wiring behind the control panel. To do this, you’ll need to remove the appropriate screws and disassemble the control panel. Once inside, locate the wiring that connects to the circuit board and touch sensor.
Disconnect these wires from their respective connections and connect them directly together with electrical jumpers or shorting clips. This should bypass the touch sensor’s functionality allowing your faucet to remain activated without having to press down or activate it manually.
Be sure that all necessary safety protocols are followed when dealing with electricity as well as for proper installation of any new connections or components you install.
If you encounter any issues while attempting to bypass the touch sensor, it may be best to contact a qualified professional. They should be able to safely and efficiently resolve your issue without compromising any safety regulations or manufacturer warranties.
Read: Touch on sink faucet not working
Conclusion
You can bypass the touch sensor on your faucet by moving the wires to the correct position. You may need to use a screwdriver to loosen the screws, but be careful not to over-tighten them.
Once you have moved the wires, turn on the water and test your faucet to see if it is working properly. If it is not, you may need to call a professional plumber for assistance.
Hey! I’m Anne. Welcome to Kitchen Faucet Advice! Anne have started this blog to help happy families to get right kitchen faucet for their lovely kitchens. When she is free, she loves writing about her experiences and play with her dog!