Are you having problems with your kitchen sink faucet? Whether it’s a sporadic drip or total failure, replacing the washer may be just what you need to do. Don’t worry; it’s easy and inexpensive.
Here we’ll show you step-by-step how to replace the washer so that you can get back to using your faucet without a hitch.
Also, this is an ideal project for beginners as repairing a leaking faucet with a new washer usually requires few tools and only takes about half an hour of work!
How Do You Change a Washer on a Kitchen Faucet?
To change the washer on a kitchen faucet, you will need to turn off the water supply. This can be done by turning both of the valves under the sink clockwise until they are closed.
Next, use an adjustable wrench to unscrew and remove the retaining nut that holds the housing in place. Carefully pull out the stem assembly and replace it with a new one that contains a rubber washer.
Reinstall the retaining nut and tighten it using an adjustable wrench. Finally, open up both of the valves slowly and check for any leaks before turning on your faucet. If no leaks occur, you have successfully changed your faucet’s washer!
Make sure to keep extra parts such as packing string, washers, and O-rings on hand in case you ever need to make a repair. Following these steps will help ensure that your kitchen faucet is working properly and efficiently.
Is It Easy to Change Kitchen Sink Faucet Washer?
One of the most common problems homeowners face with their kitchen sink is a leak, usually coming from the faucet.
The source of this leak could be due to a faulty washer in the faucet. Washers are small rubber or plastic discs that go between the valve and spout and serve as a seal to prevent water from leaking out when the faucet is turned on or off.
Changing the washer in your kitchen sink faucet can be an easy DIY project for any homeowner, as long as you have the right tools and supplies.
The first step to changing a washer in your kitchen sink faucet is to turn off the water supply leading to it. You may need to unscrew the handle of the faucet to access the valve and then turn it clockwise to shut off the water.
Next, use a pair of pliers or an adjustable wrench to unscrew the cap from the top of the faucet. Underneath, you should find either a hex nut or a screw that is holding the stem in place.
Once you have removed this part, pull out the stem and remove any old washers that may be stuck inside.
You can either replace these washers with new ones (which can usually be found at your local hardware store) or use Teflon tape if needed.
Make sure all parts are tightly secured before reassembling and turning on your water supply.
Read: Kitchen tap washer replacement
Conclusion
So, there you have it. You don’t need to be a professional plumber or technician to fix your kitchen sink faucet.
Just follow the simple steps we listed above and you should have no problem changing that washer in no time.
If you still can’t seem to get it changed or if something else is wrong with your faucet, then it may be time to call in a professional.

Hey! I’m Anne. Welcome to Kitchen Faucet Advice! Anne have started this blog to help happy families to get right kitchen faucet for their lovely kitchens. When she is free, she loves writing about her experiences and play with her dog!